Fiber Optic Products
A high-tech enterprise specializing in the research and development of optical fiber communications and manufacturing.
Language
A high-tech enterprise specializing in the research and development of optical fiber communications and manufacturing.
The 250μm fiber is positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The parallel steel wires are placed at the two sides tape. The cable is completed with a polyethylene (PE) sheath.
Detail Information | |||
| Armor: | Aluminum Tape, Steel Tape | Fiber Count: | 24 Core |
|---|---|---|---|
| Sheath Colo: | Black | Package: | Wooden Drum |
| Length Per Roll: | 2km To 4km | Application: | Outdoor Aerial Application |
| Fiber Brand: | Corning/YOFC/FIBERHOME | Loose Tube Material: | PBT |
| High Light: | armored fiber cable,armoured fiber cable | ||
Features:
Good mechanical and temperature performance
High strength loose tube that is hydrolysis resistant
Special tube filling compound ensure a critical protection of fiber
Crush resistance and flexibility
PSP enhancing moisture-proof
Two parallel steel wires ensure tensile strength
Small diameter, light weight and friendly installation
Storage / Operating Temperature: -40℃~+70℃
Application:
Usable in Duct / Aerial
Cable design
24 SM-fibers.
Steel wire as central strength member.
Loose buffer tubes SZ-stranded.
The buffered tube filled with filling compound while the stranded core covered with aluminum tape
PE Cable outer sheath
Suitable as: duct installation
24 SM-fibers.
Steel wire as central strength member.
Loose buffer tubes SZ-stranded.
The buffered tube filled with filling compound while the stranded core covered with aluminum tape
PE Cable outer sheath
Suitable as: duct installation
IEC 60793-1, 60793-2, 60794-1
ITU-T G650, G652
| MFD(1310nm) | 9.2mm±0.4mm |
| MFD(1550nm) | 10.4mm±0.8mm |
| Cladding diameter | 125mm±1mm |
| Fiber diameter | 250 ± 15 mm (Colored) |
| Core/cladding concentricity error | £0.6mm |
| Cladding non circularity | £1.0% |
| Cut off wavelength | £1260nm |
| Attenuation coefficient | 1310nm: £0.36dB/km |
| 1550nm: £0.22dB/km | |
| Bending-loss performance of optical fiber | £0.05dB |
| Polarization mode dispersion | £0.1ps/Ökm |
| Zero-dispersion wavelength | 1300 – 1324 nm |
| Zero-dispersion slope | £0.093ps/(nm2•km) |
| Tensile strength | 1500N, conform to IEC 794-1-E1 while fiber strain ≤0.33% |
| Crush | 1000N/100mm, conform to IEC 794-1-E3 |
| Impact | conform to IEC 794-1-E4 |
| Repeated bending | conform to IEC 794-1-E6 |
| Torsion | conform to IEC 794-1-E7 |
| Flexing | conform to IEC 794-1-E8 |
| Kink | conform to IEC 794-1-E10 |
| Cable bend | conform to IEC 794-1-E11 |
| Vibration | conform to IEC 794-1 |
| Water penetration | conform to IEC 794-1-F5B |
| The dielectric strength of outer jacket | conform to ITU-T Rec.K25 |
| Spark test voltage | Spark test voltage of cable outer jacket will be no less than 8kV AC |
| Abrasion | conform to IEC 794-1-E2 |
| Temperature cycling test | conform to IEC 794-1-F1 |
| Loose tube color code | 1 | 2 | 3 | 4 | 5 | 6 |
| Blue | Orange | Green | Brown | Slate | White | |
| 7 | 8 | 9 | 10 | 11 | 12 | |
| Red | Black | Yellow | Violet | Rose | Aqua |
| Loose tube color code | 1 | 2 | 3 | 4 | 5 | 6 |
| Blue | Orange | Green | Brown | Slate | White | |
| 7 | 8 | 9 | 10 | 11 | 12 | |
| Red | Black | Yellow | Violet | Rose | Aqua |
| Items | Descriptions | |
| Optical fiber | G.652 | |
| Central strength member | Material | Steel wire |
| Diameter(mm) | 1.45 | |
| Loose tube | Material | PBT |
Outer sheath
| Material | PE |
| Thickness(mm) | 1.6 | |
| Cable diameter(mm) | 8.9 | |
| Cable weight(Kg/km) | 75 | |
| Tensile strength | Short term(N) | 1500 |
| Long term(N) | 600 | |
| Crush | Short term(N/10cm) | 1000 |
| Long term(N/10cm) | 300 | |
| Applicable temperature range | Operation | - 40℃ ~ +70℃ |
| Installation | - 40℃ ~ +70℃ | |
Bending Radius | Storage & shipping | - 40℃ ~ +70℃ |
| unloaded | 10 times of outer diameter | |
| loaded | 20 times of outer diameter | |
The product is accord with the instruction of EU ROHS
1 Packing
2 Each single length of cable shall be wound on an Iron stand-wooden composite drum.
3 Covered by plastic buffer sheet.
4 Sealed by strong wooden battens.
5 Drum length
6 Standard drum length is 3000m±3%;
7 Total quantity is at least the ordered quantity.
8 Or it can be delivered according to customers’ requirements, but not longer than 4000m.
9 Drum Marking
Manufacturer name;
Manufacturing year and month;
Roll-direction arrow;
Cable outer end position indicating arrow;
Cable type and size;
Drum number;
Drum length;
Gross / net weight;
Caution plate indicating the correct method for loading, unloading and convey the cable;
Other customer information such as contract no., project no., and delivery destination. (if needed)
Cable identification documents
Product qualified certificate;
Test report.
CONTACT US
Take advantage of our unrivaled knowledge and experience, we offer you the best customization service.
SEND US A MESSAGE
HOTLINE
+8613509645699
EMAIL
RECOMMENDED
They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.
008613509645699
