Fiber Optic Coupler
A high-tech enterprise specializing in the research and development of optical fiber communications and manufacturing.
Language
A high-tech enterprise specializing in the research and development of optical fiber communications and manufacturing.
Fiber Optic Switch FSW Device 1x2 Mechanical Optical WDM high speed for fiber transmission system route
Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Detail Information | |||
| Wavelength Range: | 850±40 / 1300±40 | Test Wavelength: | 850 |
| Insertion Loss 1, 2: | ≤1.2dB(Include Fiber Optic Connector) | Connector: | SC LC FC / UPC/APC CONNECTORS |
| Return Loss: | ≥30dB | Crosstalk: | MM ≥ 35dB |
| Dimension: | (L)150.0×(W)80×(H)70 ±0.2 | Repeatability: | ≤±0.05 DB |
| High Light: | fiber optic splitter,wdm components | ||
1. Features
·Low Loss and High Reliability
·Modularized Design
·Epoxy-free on Optical Path
2. Applications
·Ring Network
·Remote Monitoring in Optical Network
·Testing of Fiber, Optical Component
3. Compliance
a.Telcordia GR-1209-CORE-2001
b.Telcordia GR-1221-CORE-1999
c.ITU-T G.694.1
d.RoHS
4. Specifications
Parameters | Unit | FSW-1×24 | |
Wavelength Range | nm | 850±40 / 1300±40 | 1260 ~ 1650 |
Test Wavelength | nm | 850 | |
Insertion Loss | dB | ≤1.2dB(Include fiber optic connector) | |
Return Loss | dB | MM ≥ 30 | |
Crosstalk | dB | MM ≥ 35 | |
PDL | dB | ≤0.05 | |
WDL | dB | ≤0.25 | |
Repeatability | dB | ≤±0.05 dB | |
Operating Voltage | V | 3.0 or 5.0 | |
Durability | Cycles | ≥ 10 Million | |
Switching Time | ms | 10ms(Adjacent channel) | |
Optical Power | mW | ≤500 | |
OperatingTemperature | ℃ | -20 ~ +70 | |
Storage Temperature | ℃ | -40 ~ +85 | |
Relative Humidity | % | 5 ~ 95 | |
Weight | g | 14 | |
Dimension | mm | (L)150.0×(W)80×(H)70 ±0.2 | |
Note: 1 Within operating temperature and SOP. 2 Excluding Connectors. | |||
5.Product Structure
6.Pin Configurations(DB9)
| Pin | Name | I/O | Description |
| 1,14,10,23 | GND | Power | |
| 7 | TXD | Output | Serial port sending signal |
| 6 | RXD | Input | Serial port receive signal |
| 12,24,25 | +5VDC | Power | +5VDC Max: 550mA Average:300mA |
| Other | NA |
7.Command Definition
Baud rate: 9600bps
Parity: none
Data bit: 8 bits
Stop bit: 1bit
| Command | Description |
| <STATUS_?> | Checking present status: <STA_overall channels _ control mode _ present channel> <STA_032_1_001> |
<MODE_x>
| control mode setup: x=0:Parallel control x=1:Serial control Back successfully:<MODE_OK> Back failure:<MODE_ER> |
<CHN_xxx>
| Present channel setup: xxx value:000~128(from ch0 to ch 128) Back successfully:<CHN_OK> Back failure:<CHN_E1>or <CHN_E2> |
8.Notes:
When installing the optical module, the optical fiber core should not be overly bent (see below), so as not to affect the performance index of the optical module.
9.Our Services:
a.Professional manufacturer, 100% tested for more than 3 times.
b.Customers solutions in days, not weeks.
c.Warmly services with careful attentions.
d.Can provide your specific inquiry within 24 hours.
e.Save much cost, bring more benefits for customer to expand business.
f.We have been 12 years experience in this field. We are the professional supplier that you can trust.
CONTACT US
Take advantage of our unrivaled knowledge and experience, we offer you the best customization service.
SEND US A MESSAGE
HOTLINE
0086 136824722227
EMAIL
RECOMMENDED
They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.
+8613682472227