KXT-M100 is designed and manufactured by Shenzhen KEXINT Technology Co.,Ltd, designed for fulfilling FTTH (Fiber To The Home) and triple play service demand of fixed network operators. The box is based on the mature Gigabit GPON technology, which has high ratio of performance to price.
It is highly reliable and easy to maintain, with guaranteed QOS for different service. And It is fully compliant with technical regulations such as ITU-T G.984.x and technical requirement of GPON Equipment from China Telecom.
CPU | ITL9601D VA3 |
DDR | 256M |
FLASH | 128M |
Optical fiber interface | 1 SC / APC fiber por |
Ethernet interface | 1 x 10 / 100 / 1000m adaptive port (RJ45) |
Product features:
➤ Comply with ITU-T g.984 standard
➤ It supports layer 2 switching of Ethernet services and line speed forwarding of uplink and downlink services
➤ Support frame filtering and suppression
➤ Support the standard 802.1Q VLAN function and VLAN conversion
➤ 4094 VLANs supported
➤ Support dynamic bandwidth allocation
➤ Support PPPoE, ipoe, bridge and other services
➤ Support QoS, including service flow classification, priority marking, queuing and scheduling, traffic shaping and traffic control
➤ Support 2.6.3 IGMP snooping
➤ Support Ethernet port speed limit, loop detection and layer-2 isolation
➤ Support power failure alarm
➤ Support remote reset and restart functions
➤ Support the function of restoring factory parameters
➤ Support data encryption
➤ Support status detection and fault reporting
➤ Support power lightning protection
Port characteristics:
✦ PON: connect the OLT equipment at the source end through the optical fiber line
✦ Ethernet port: it is connected to the user side equipment through twisted pair network cable, and the port rate is 10 / 100 / 1000m
✦ Reset button: restart the equipment; Press and hold for more than 3 seconds and the system will return to the factory default
✦ Power switch: power on / off
✦ Power interface: connected to external power supply
Optical properties:
♠support wavelength division multiplexing technology, single fiber dual wave bidirectional transmission
♠ interface type: SC / APC
♠ maximum spectral ratio: 1:128
♠ rate: uplink 1.25gbps, downlink 2.5Gbps
♠ receiving wavelength: 1490nm
♠ transmission wavelength: 1310nm
♠ output optical power: - 1 ~ + 4dbm
♠ receiving sensitivity: < - 27dBm
♠ The longest distance between OLT and ONU is 20km
Physical properties:
♣ power supply: AC 200V
♣ Operating temperature: 0 ° ~ 40 ℃
♣ Storage temperature: - 40 ° ~ 70 °
♣ Humidity: 10 ~ 90% non condensing
♣ power consumption: < 6W
♣ chassis specification: 86 * 86 * 32mm (length * width * height)

CONTACT US
Take advantage of our unrivaled knowledge and experience, we offer you the best customization service.
SEND US A MESSAGE
HOTLINE
+8613509645699
EMAIL
RECOMMENDED
They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.