MMC Breakouts
A high-tech enterprise specializing in the research and development of optical fiber communications and manufacturing.
Language
A high-tech enterprise specializing in the research and development of optical fiber communications and manufacturing.
Streamline your high-speed short-reach networks and elevate connectivity in 400G/800G environments with this premium MMC-24 APC (Female) to 3 x MTP®-8 UPC (Female) Multimode OM4 Breakout Cable.
By integrating US Conec’s state-of-the-art VSFF (Very Small Form Factor) MMC technology, this 24-fiber laser-optimized OM4 harness cable delivers up to 3x the patching density of conventional MTP solutions, allowing for maximum airflow and neat cable management within crowded racks. Outfitted with an eye-catching magenta OFNP Plenum-rated jacket, it ensures both rapid visual link identification and compliance with the highest indoor fire safety regulations. Featuring an elite-grade maximum insertion loss of ≤0.35dB and strict 100% factory 3D interferometer testing, this jumper guarantees outstanding optical alignment and reliable performance for your mission-critical data center applications.
Product Description
MMC-24 to 3 x MTP®-8 Breakout Cable, F to F, APC to UPC, 24F, OM4, OFNP, 0.35dB, Jumper Polarity
The MMC fiber cable is equipped with an MMC connector, a Very Small Form Factor (VSFF) multi-fiber optical connector designed to terminate single-mode and multimode fiber cables up to 2.5mm in diameter. It employs novel TMT ferrule technology harmonized with the MT/MT-16 alignment structure. Individual connector access in the most extremely dense connector environments is easily accomplished using revolutionary DirectConec™ push-pull boot technology.
The breakout cable aggregates multiple MTP®-8 connectors into an MMC-24 connector, streamlining infrastructure and helping optimize both space and network reliability. Therefore, MMC connectivity enables solutions that minimize the space required across multiple applications, including structured cabling, high fiber count data center interconnects, and high-bandwidth applications.
Product Highlights
VSFF MMC Connector Supports 3x Cabling Port Density over the MPO Format
Top & Bottom Rails Enable Correct Orientation to Simplify Installation and Maintenance
Utilizes Proven MT/MT-16 Mechanical and Fiber Alignment Structures
DirectConec™ Push-Pull Boot for Effortless Connector Insertion and Extraction
Aggregating 3x MTP®-8 into an MMC-24 to Save Space and Network Reliability
TMT Elite™ Enable 0.35dB Low IL and APC for Superior Return Loss
Tested to Telcordia GR-1435
Support Data Center Structured Cabling and High-Bandwidth Applications
Specifications
| Connector A | US Conec MMC Female (Non-Pinned) | Connector B | US Conec MTP® Elite Female (Non-Pinned) |
| Polish Type | APC to UPC | Glass Fiber | Bend-Insensitive Fiber |
Fiber Mode | OM4 50/125μm | Wavelength | 850/1300nm |
| Fiber Count | 24 Fibers | Polarity | Jumper Polarity |
| Cable Outside Diameter (OD) | 2.5mm | Cable Jacket | Plenum (OFNP) |
| Min. Bend Radius (Optical Fiber) | 7.5mm | Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Tensile Strength (Long Term) | 30N | Tensile Strength (Short Term) | 100N |
| Insertion Loss | ≤0.35dB | Return Loss | ≥40/27dB (MMC/MTP) |
| Attenuation at 850nm | ≤2.3dB/km | Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | -10 to 60°C (14 to 140℉) | Storage Temperature | -10 to 70°C (14 to 158℉) |
Connectivity Solutions
Features
3x Cabling Density over the MPO Format
The VSFF MMC connectors offer significant space savings, which help provide approximately three times the cabling port density over the MPO format.
Superior Workmanship Guarantees Stable Transmission
Bend insensitive fiber paired with high-performance US Conec MMC connectors delivers reliable connectivity for dense data center and carrier-grade applications.
Proven TMT Ferrule Technology
The TMT ferrule format is compliant with IEC 61755 and 61754 precision alignment structures for MT and MT-16 ferrules, ensuring precision polishing and mechanical integrity for repeated insertions and extractions.
Plenum Jacket, The Highest Fire Safety-Rated
The OFNP (plenum) jacket is safe for plenum air spaces and compatible with both unrated and OFNR (riser) rated applications.
Tested to Telcordia GR-1435
The MMC cable meets the Telcordia GR-1435 standards and covers the performance, tests, and quality requirements, seamlessly integrating with industry-standard infrastructure by adhering to a strict quality assurance program.
Why Choose Us
Company Profile
CONTACT US
Take advantage of our unrivaled knowledge and experience, we offer you the best customization service.
SEND US A MESSAGE
HOTLINE
+8613509645699
EMAIL
RECOMMENDED
They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.
0086 13682472227
