Fiber Optic Products
A high-tech enterprise specializing in the research and development of optical fiber communications and manufacturing.
Language
A high-tech enterprise specializing in the research and development of optical fiber communications and manufacturing.
Hybrid cables have both fiber and copper conductors under the same cable jacket to deliver data and power to the very edge of the enterprise network. By integrating fiber and copper in one cable, the cables eliminate the need to install separate fiber and power cables. This saves installation time, labor costs and duct or tray space. And hybrid cables simplify the process of supplying data and power to remote devices, even in locations where a power outlet is unavailable. Additionally, the cables achieve ultimate flexibility by bringing together the future-ready bandwidth capabilities of optical fiber and the powering capabilities of copper.
Product Highlights
2-in-1 Hybrid Cable Design, One Cable Meets Signal and Power Needs
Pre-Terminated LC/SC Connector Allows for Implementing Plug & Play Solution
G.657.A2 Fiber Provides Greater Bandwidth and Enhances Network Transmission Characteristics
OFNP Fire Safety-Rated Trunk Jacket for Use in Plenum Air Spaces
＞99.95% Oxygen-Free Copper Conductors with Stable Transmission Performance
Streamlining Infrastructure onto a Single Cable Allows for Overcoming Space Constraints
Used for Indoor Communication or Industrial Pathways Requiring Combined Data and Power
Specifications
| Connector A | LC UPC Simplex | Connector B | SC UPC Simplex |
| Fiber Count | 2 Fibers | Fiber Grade | G.657.A2 |
| Fiber Mode | OS2 9/125μm | Wavelength | 1310/1550nm |
| Conductor Count | 2 Conductors | Conductor Gauge | 17AWG |
| Conductor Material | ＞99.95% Oxygen-Free Copper | Conductor Type | Stranded |
| Flame Rating (Trunk) | Plenum (OFNP) | Breakout Length | 0.5m |
| Construction Type | Non-Armored | Cable Type | Tight-Buffered |
| Trunk Outside Diameter (OD) | 7.2-7.7mm | Breakout Outside Diameter (OD) | 2.0mm (Fiber) |
Min. Bend Radius (Optical Fiber | 7.5mm | Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Crush Resistance | 500N/100mm (Short Term) | Tensile Load | 80/100N (Long/Short Term) |
| Insertion Loss | ≤0.3dB | Return Loss | ≥50dB |
| Attenuation at 1310nm | ≤0.4dB/km | Attenuation at 1550nm | ≤0.3dB/km |
| Operating Temperature | -5 to 60°C (23 to 140℉) | Storage Temperature | -10 to 70°C (14 to 158℉) |
Connectivity Solutions
Features
2-in-1 Hybrid Cable Design, Fiber and Power
By integrating fiber and copper in one cable, a single cable transmits high-speed data and stable power simultaneously, replacing traditional dual-cable deployment to simplify wiring.
Plenum Trunk Jacket, The Highest Fire Safety-Rated
The OFNP (plenum) jacket is safe for plenum air spaces, and compatible with both unrated and OFNR (riser) rated applications.
Integrated Dual Transmission Performance
The hybrid cables achieve ultimate flexibility by bringing together the future-ready bandwidth capabilities of optical fiber and the powering capabilities of copper. This saves pathway space, labor costs and speeds up deployment.
Meet the Needs of Various Applications
The hybrid cables enable the connection of powered remote devices, and the network gains access to a vast and growing ecosystem of applications.
FAQ
Q1. What exactly is a hybrid fiber and power cable, and where is it used?
A hybrid fiber and power cable carries optical fibers and copper conductors inside one jacket, so a single cable run delivers both data transmission and electrical power. KEXINT's hybrid cable is widely specified by wholesale buyers, telecom integrators and contractors for FTTH, FTTA, campus and last-mile links where remote devices need power and connectivity in one pull — cutting material cost and installation labor versus two separate cables.
Q2. Why is OS2 single mode the right fiber type for this cable?
OS2 single mode fiber supports much longer transmission distances and higher bandwidth headroom than multimode, making it a future-proof choice for 10G/100G and beyond, including 400G/800G-ready backbone planning. For B2B projects where distance and upgrade path matter, choosing an OS2 hybrid cable factory-direct means one SKU covers current and next-generation builds, and you avoid costly re-cabling later.
Q3. What does the Plenum (OFNP) rating mean, and why should I care?
OFNP is the highest plenum fire-safety rating recognized under US building codes: low flame spread and low smoke generation, approved for air-handling spaces such as above ceilings and under raised floors. For distributors and installation contractors, specifying plenum-rated cable from a reliable supplier is often a code requirement — skipping it can mean failed inspections and expensive rework on completed projects.
Q4. Why tight-buffered construction for an indoor hybrid cable?
Tight-buffered cable applies a protective coating directly over each fiber, so there is no gel filling to clean and no conduit required for indoor runs. It terminates faster and handles tighter bends, which reduces on-site labor cost — a key factor when you compare factory direct pricing for large indoor deployments. It is the preferred construction for indoor patch, rack and riser applications.
Q5. Why LC UPC simplex to SC UPC simplex connectors?
LC and SC are the two most widely deployed connector standards in telecom and data center networks, and UPC polish keeps insertion loss low. A hybrid cable terminated LC UPC simplex to SC UPC simplex lets you interconnect different equipment generations directly, without adapters or conversion jumpers. For bulk orders, KEXINT can also re-terminate to other connector combinations as an OEM customization.
Q6. What power capacity do the 17AWG conductors provide?
The two 17AWG copper conductors are sized for powering remote equipment such as small cells, edge devices and sensor nodes over practical distances. Actual current capacity depends on circuit distance and load; KEXINT provides the full electrical datasheet for engineering evaluation before you place a bulk order, so your team can validate voltage drop against your specific deployment.
Q7. Can you customize length, jacket color, connectors and labeling?
Yes — KEXINT is an OEM/ODM manufacturer. We support custom lengths, jacket colors, connector types, polarity configurations, printing and private labeling to match your brand. Whether you need a standard stock item or a fully custom spec, our flexible MOQ is designed for wholesale buyers who want supplier-level pricing without giving up customization.
Q8. What is your MOQ and lead time for wholesale orders?
MOQ is flexible and depends on the specification — we confirm exact quantity and lead time in writing with every quotation. As a factory-direct supplier with in-house production, we keep standard configurations ready for faster dispatch. Simply send your core count, fiber type, polarity and length to get a quotation with datasheet within 24 hours from our online team.
Q9. Do you provide test reports and certifications?
Yes. Every KEXINT cable is 100% tested, and insertion loss (IL) and return loss (RL) data is provided with each shipment. Production is ISO 9001 certified and products are CE and RoHS compliant, giving procurement teams documented evidence for their vendor qualification process — no untested cable leaves the factory.
Q10. Why buy factory-direct from KEXINT instead of a trading company?
Because you get supplier pricing without middleman markup. As a factory-direct manufacturer, KEXINT offers wholesale rates, OEM/ODM readiness, private labeling, 100% tested quality and 24-hour online service with fast quotations, samples and after-sales support. For B2B buyers, that means lower unit cost, shorter lead times and a single accountable partner from sample to bulk shipment.
CONTACT US
Take advantage of our unrivaled knowledge and experience, we offer you the best customization service.
SEND US A MESSAGE
HOTLINE
+8613509645699
EMAIL
RECOMMENDED
They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.
0086 13682472227
